Online Calculators since 2009
In logistics, it is possible to build a pallet with the carton placed in one of six different positions in relation to the Pallet that you are using to transport your goods. In this guide we cover Step 10 for building an Optimal Pallet Build Configuration as illustrated and calculated on the advanced Pallet Calculator
The image below illustrates how the pallet should look at step 10 of the pallet build.
Our pallet ( in how to build a pallet step 10 ) is built by placing one carton at a time, aligning the carton to the pallet as follows:
Step 10 provides an alternate means of calculating the voids whihc exist adjacent the goods, between the goods and the caveat dimensions of the pallet. In step 10, we can see the void to the near side of the pallet, this is highlighted in green.
In this final step, we can see that with the four cartons stacked in Steps 1 through to 4, we created 3 separate voids. These voids were created as we stacked the cartons in the same direction, one on top of the other.
With the void boxes now highlighted, we can calculate the dimensions, area and volume of each of the voids and, by doing so, calculate how many additional cartons we can fit into these voids. Once those cartons have been placed, we can repeat the process, identify further voids on the pallet and calculate the number of cartons that will fit in those voids and so on.
The process repeats ad infinitum until there is insufficient space within which to stack one of our cartons on the pallet. In addition to calculating the voids and pallet fill, you also need to ensure you maintain a running weight calculation to ensure the pallet remains within weight restrictions.
We trust our 7 step guide to building a pallet proved useful. Most will of course simply enter the carton and pallet dimensions / properties into the Advanced Pallet Calculator and let the tool calculate the optimal pallet layout automatically but, it is always good to know the basic concept and calculations involved in pallet configuration and pallet build planning.
As the pallet builds, the volume of the pallet is slowly filled. Unless you are very lucky and the dimensions work out just right, you will typically be left with space within the pallet build configuration. This can be filled with additional product by turning the cartons through anyone of the 6 positions that a carton can be placed on a pallet. Using this technique, you can manually optimise your pallet build and get the most cartons/boxes onto your pallet. Alternatively you can use the advanced Pallet Calculator which will automatically calculate the optimal load configuration for a pallet for you.
An optimal pallet build identifies all available voids surrounding the goods and calculates the space available for stacking additional products / cartons etc. The Advanced Pallet Calculator does this automatically by identifying the three key voids which exist when cartons/boxes/product is placed onto a pallet. The images below (which can be clicked to be viewed full screen) highlight the locations of those voids. The advanced pallet calculator results will identify these voids, their properties (width, length, height and cubic area) and, where feasible, place cartons into these spaces (depending on any way up / stackable properties).
|Click on the images below to see a larger picture and additional information.|
Pallet Void 1
Pallet Void 2
Pallet Void 3
Pallets can be built by placing boxes/cartons onto a pallet in one of six different configurations. The links below highlight the different pallet build configurations that are possible.